background image

- 32 -

VX10000

LGE Internal Use Only

Copyright © 2007 LG Electronics. Inc. All right reserved
Only for training and service purposes

2. Digital/Voice Processing Part

2.1 Overview 

The digital/voice processing part processes the user's commands and processes all the digital and voice signal 

processing in order to operate in the phone. The digital/voice processing part is made up of a main keypad/touch 

keypad/LCD, receptacle part, voice processing part, mobile station modem part, memory part, and power supply part.

2.2 Configuration 

2.2.1 Keypad/LCD and Receptacle Part 

This is used to transmit keypad signals to MSM6550. It is made up of a keypad backlight part that illuminates the 

keypad, LCD part that displays the operation status onto the screen, and a receptacle that receives and sends out voice 

and data with external sources.

2.2.2 Voice Processing Part

The voice processing part is made up of an audio codec used to convert MIC signals into digital voice signals and 

digital voice signals into analog voice signals, amplifying part for amplifying the voice signals and sending them to 

the ear piece, amplifying part that amplifies ringer signals coming out from MSM6550, and amplifying part that 

amplifies signals coming out from MIC and transferring them to the audio processor. 

2.2.3 MSM (Mobile Station Modem) 6550 Part 

MSM is the core elements of CDMA terminal and carries out the functions of CPU, encoder, interleaver, 

deinterleaver, Viterbi decoder, Mod/Demod, and vocoder.

2.2.4 Memory Part

The memory part is made up of a NAND Flash memory and a SDRAM for storing data. 

2.2.5 Power Supply Part 

The power supply part is made up of circuits for generating various types of power, used for the digital/voice 

processing part. 

Z3X-BOX.COM

Содержание VX10000 Voyager





































































































































































Отзывы: