14
OVERVIEW
1.5
1.5
2
1,5
1,5
2
< Warning > When the Robot Cleaner is operated with the dust bin compartment lid left
open, it can cause an injury or serious damage to the product.
1
Install the home station. (p15)
Insert the power cord plug into an outlet and locate the
station against a wall. If power is not supplied to the
home station, the Robot Cleaner will not charge.
2
Turn on the power supply of the Robot
Cleaner. (p16)
Turn ON the power switch on the rear-left of
Robot Cleaner, and press the ‘START/STOP’
button on the top or press the ‘Power’ button on
the Remote controller.
※
If the power supply is not turned on, refer to
page 16.
3
Check the dust bin.
Check the cleanness of the dust bin before starting
cleaning and close the dust bin compartment cover on
the main unit.
4
Start cleaning. (p17)
Press the ‘START/STOP’ button (or ‘ ’ button on the
Remote Controller) once again while the Robot Cleaner
is turned on. You will hear an announcement of the
cleaning mode and cleaning will begin once the Robot
Cleaner has reversed and turned around.
5
6
Automatic charge. (p18~19)
Use the cleaning mode and auxiliary
functions. (p20~26)
The Robot Cleaner will self-diagnose and automatically
return to the home station to recharge before
the complete discharge of the battery. It takes
approximately three hours to charge the battery.
Use the buttons on Robot cleaner and Remote
Controller to use each cleaning mode and supporting
features Cleaning modes include ZigZag, Cell by Cell,
Spot, My space, and Repeat cleaning; supporting
features include Manual, Scheduled and Microfiber Mop
cleaning.
