27
CLEANING THE BRUSH
Fit the Fixing Hook (rectangular
shape) on the side of the Brush into
the slots, with the colors matching.
While pushing the Brush to the
arrow direction, fit the Fixing Hook
(rectangular shape) on the opposite
side into the slot.
Press down and close the Cover until
a 'crack' sound is heard from both
sides of Fixing Hook.
※
Be careful not to trap the side
brush bristles under the cover
when closing it.
Push the Brush all the way into
the yellow protrusion.
While pushing the Brush, lift the
white protrusion part up to separate
it from the main unit.
Carefully clean the Brush with a
vacuum cleaner or scissors.
Turn the Main Power Switch OFF
before starting the clean.
Put the Robot Cleaner upside down
on a soft cloth.
After checking for foreign materials,
press down the Fixing Hook and pull it
up to separate the brush Cover.
By using the cleaning tool, clear
hairs and other debris and foreign
materials on the Brush and from the
2 smaller jockey wheels.
The rotating Brush, located on the bottom of Robot Cleaner, helps collect the dust. Clean the Brush as per the following sequence.
※
Before turning over the main unit, lay a soft cloth on the floor and remove the Dust Bin.
Otherwise, the main unit can get scratched and dust will fall from Dust Bin.
