![LG VR6260 Series Скачать руководство пользователя страница 22](http://html.mh-extra.com/html/lg/vr6260-series/vr6260-series_owners-manual_1903856022.webp)
20
CLEANING MODES
Pressing 'My Space' on Remote Controller will set the
My Space cleaning mode with a voice message.
For cleaning of particular spaces, select this mode.
The 1st stage:
Use the Remote Controller to manually run
the cleaning on outskirts of each cleaning block.
※
This cleaning mode will be accepted when the distance of the start and end position is less than 1
.
The 2nd stage:
Pressing the 'Start' button will then make the Robot Cleaner clean the manually outlined area by itself.
※
Upon failure to correctly outline a zone, a voice will announce, which says "Area does not meet the
specifi ed conditions. Please continue to make specifi ed area for cleaning process."
Use the Remote Controller to assign a zone, again.
※
Upon completion of cleaning for all selected areas, the Robot Cleaner will be placed in the cleaning mode
(Zigzag or Cell by Cell) which was run, right before.
• While recharging, you cannot activate 'My Space clean' mode.
• To change the cleaning mode while Robot Cleaner is in operation, press 'Stop/OK' button
first to select a mode The cleaning will the start from the begining.
My Space Cleaning
Tip
My Space
Содержание VR6260 Series
