21
MOP CLEANING (Selected models only (VR*.LVM))
1. Attach the ultra micro
Ņ
ber mop to the Velcro of the
mop plate as shown in the
Ņ
gure.
2. Firmly slide the Mop Plate into the furrows
until you hear a 'click' sound.
※
Note that, if the Mop Plate is not secured correctly, it
may separate during the cleaning.
3. It is essential that the
Ņ
xing hooks on the Mop Plate
align correctly on to the
Ņ
xing grooves on the underside
of the cleaner.
For mop cleaning, mount the mop and mop plate to the Robot Cleaner according to the following instructions:
By attaching the ultra micro
Ņ
ber mop, you can effectively use
the Robot Cleaner to remove dust on hard
ņ
oor surfaces.
When the mop plate is attached, the Robot Cleaner will not
climb on to carpets or over thresholds, in order to prevent
transferring dirt from the mop.
• To avoid odors, wash any foreign material or dust off the mop after cleaning is completed.
• To avoid staining floors, do not use the ultra microfiber mop to clean
when dirt is contaminated with liquids such as coffee or ink.
• To avoid damage to carpets from the Velcro or dirt transfer from the mop,
do not attempt to clean the carpet while the mop plate or mop is attached.
• Keep the ultra microfiber mop dry. Do not use it on wet surfaces.
If there is moisture on the floor, it can interfere with the navigation and damage the unit.
• Smart Diagnosis feature is not available, when the Mop Plate is attached.
• Some models may not come with Microfibre Mop or Mop Plate.
Fixing hook
Fixing groove
“Click!”
Tip
Caution
Do not cover the bottom
camera sensor by mop.
