19
CLEANING MODES
Pressing 'My Space' on the Remote Controller will set the My Space cleaning mode with a voice
message. For cleaning of particular spaces, select this mode.
The 1st stage:
Use the Remote Controller to manually set the parrameters of each cleaning block.
※
This cleaning mode will be accepted when the distance of the start and end position is less
than 1
.
The 2nd stage:
Pressing the 'Start' button will then make the Robot Cleaner clean the manually outlined area by itself.
※
Upon failure to correctly outline a zone, a voice will announce, which says "Area does not meet the speci
Ņ
ed conditions. Please
continue to make speci
Ņ
ed area for cleaning process."
Use the Remote Controller to assign a zone, again.
※
When My Space cleaning is completed, the mode is switched to Auto Clean (ZigZag).
• While recharging, you cannot activate 'My Space clean' mode.
• To change the cleaning mode while the Robot Cleaner is in operation, press 'Stop/OK' button first then select a
cleaning mode. The cleaning will then start from the begining.
My Space Cleaning
Tip
My Space
