Wireless Remote Control
Inserting Batteries
If the display screen of the remote control begins
to fade, replace the batteries. Insert AAA (1.5 V)
batteries before using the remote control.
1
Remove the battery cover.
2
Insert the new batteries and make sure that the
+ and - terminals of the batteries are installed
correctly.
Installing the Remote Control Holder
To protect the remote control, install the holder where
there is no direct sunlight.
1
Choose a safe and easily accessible location.
2
screwdriver.
Operating method
Point the remote control towards the signal receiver
at the right side of the air conditioner to operate it.
NOTE
•
The remote control may operate other electronic
devices if it is directed towards them. Make sure to
point the remote control towards the air conditioner
signal receiver.
•
For proper operation, use a soft cloth to clean the
signal transmitter and receiver.
•
In case of a function not provided in the product,
no buzzer sound occurs from the product when a
button for such function on the remote control is
pressed except for Air Flow Direction(
), Energy
Display(
kW [3 s]
).
Setting the Current Time
1
Insert batteries.
•
The icon below blinks at the bottom of the
display screen.
2
Press
or
button to select the minutes.
3
Press
SET/CANCEL
NOTE
•
The On/Off Timer is available after setting the
current time.
Using the °C/°F Conversion
Function(Optional)
This function changes unit between °C and °F.
•
Press and hold
SWING
℃↔℉ [5 s]
button about 5 seconds.
Operating the Air Conditioner
Without the Remote Control
You can use the
ON/OFF
button of the indoor unit to
operate the air conditioner when the remote control is
unavailable.
1
Open the front cover (Type1) or horizontal
vane(Type2).
2
Press the
ON/OFF
button.
Type1
ON/OFF
Type2
ON/OFF
NOTE
•
The stepping motor may be broken, if the horizontal
vane opens rapidly.
•
The fan speed is set to high.
•
The feature may be changed according to the type
of model.
•
The temperature cannot be altered when using this
emergency On/Off button.
•
For cooling-only models, the temperature is set to 22 °C.
•
For cooling & heating models, the temperature is
set from 22 °C to 24 °C.
ENGLISH
9
