background image

7

IMPORTANT SAFETY INSTRUCTIONS

•  Do not put any objects into openings.

 

Failure to do so could result in product damage.

•  Do not use with any opening blocked: keep free of 

dust, lint, hair, and anything that may reduce air flow.

 

Failure to do so could result in product damage.

•  Do not use vacuum cleaner without dust tank and/or 

filters in place. 

Failure to do so could result in product damage.

•  Always clean the dust bin after vacuuming carpet 

cleaners or fresheners, powders and fine dust.

 

These materials clog the filters,reduce airflow and can 

cause damage to the cleaner. Failure to clean the dust bin 

could cause permanent damage to the cleaner.

•  Do not use vacuum cleaner to pick up sharp hard 

objects, small toys, pins, paper clips, etc.

 

They may damage the cleaner or dust bin.

•  Store the vacuum cleaner indoors.

 

Put the vacuum cleaner away after use to prevent tripping 

over it.

•  The vacuum cleaner is not intended by use by young 

children or infirm people without supervision.

 

Failure to do so could result in personal injury or product 

damage.

•  Only use parts produced or recommended by LG 

Electronics Service Agents.

 

Failure to do so could result in product damage.

•  Use only as described in this manual. Use only with 

LG recommended or approved attachments and 

accessories. 

Failure to do so could result in personal injury or product 

damage.

•  To avoid personal injury and to prevent the machine 

from falling when cleaning stairs, always place it at 

the bottom of stairs. 

Failure to do so could result in personal injury or product 

damage.

•  Use accessory nozzles in "MIN" mode.

 

Failure to do so could result in product damage.

•  Don’t grasp the tank handle when you are moving the 

vacuum cleaner.

 

The vacuum cleaner’s body may fall when separating tank 

and body. Personal injury or product damage could result. 

You should grasp the carrier handle

 when you are 

moving the vacuum cleaner.

•  Make sure the filters (exhaust filter and motor safety 

filter) are completely dry before replacing in the 

machine. 

Failure to do so could result in product damage.

•  Do not dry the filter in an oven or microwave.

 

Failure to do so could result in fire hazard.

•  Do not dry the filter in a clothes dryer.

 

Failure to do so could result in fire hazard.

•  Do not dry near an open flame.

 

Failure to do so could result in fire hazard.

•  If the power cord is damaged, it must be replaced by 

an approved LG Electronics Service Agent to avoid a 

hazard.

•  This appliance is not intended for use by persons 

(including children) with reduced physical, sensory 

or mental capabilities, or lack of experience and 

knowledge, unless they have been given supervision 

or instruction concerning use of the appliance by a 

person responsible for their safety.

 

Children should be supervised to ensure that they do not 

play with the appliance.

CAUTION

Thermal protector :

This vacuum cleaner has a special thermostat that protects the vacuum cleaner in case of motor overheating.

If the vacuum cleaner suddenly shuts off, turn off the switch and unplug the vacuum cleaner.

Check the vacuum cleaner for possible source of overheating such as a full dust tank, a blocked hose or clogged 

filter.

If these conditions are found, fix them and wait at least 30 minutes before attempting to use the vacuum cleaner.

After the 30 minute period, plug the vacuum cleaner back in and turn on the switch.

If the vacuum cleaner still does not run, contact the manufacturer for user support.

NOTE

This Vacuum is not intended for commercial applications. It must only be used for normal indoor domestic home 

applications. It must only be used for dry vacuuming.

Содержание VK9821 Series

































Отзывы: