LG VK9821 Series, Руководство пользователя

Страница: 14 / 32

14
How to use
Basic operation of the steam cleaner
By using the steam cleaning vacuum tool, you can do vacuum cleaning and steam cleaning simultaneously or individually, in
an easy way.
The Blue Steam light indicates
that the Steam function is active.
How to add water to the steam head
How to attach the microfiber cloth
Handle
Hose
Extension pipe
Steam safety
switch
➊
Assembly and power ON/OFF
Important Note:
Always hold the steam safety switch during steam cleaning.
Always make sure that the Steam cleaning vacuum tool is filled
with demineralised water whilst in a fully upright position before
commencing the steam function.
• Align the extension pipe (2)and the terminal part of the steam
cleaning vacuum tool (3), and connect the two completely until
you hear the “Click”. If the steam cleaning vacuum tool and
the extension are not completely connected, the nozzle will be
pulled out or the steam will not be generated.
• Connect the hose (1) and the extension pipe (2) completely
until you hear the “Click” sound.
• When you press the “STEAM” button (4) on the function control
button on the handle part of the hose (1), the steam will be
generated. Initial steam generation time is about 2.5 minutes
and it will take a little longer for the cloth to get wet. You must
operate the “STEAM” button after filling the water.
• When you press the “STEAM” button (4)one more time or
press the “OFF” button (5), the steam will stop.
➋
How to fill the steam head and, how to attach the microfiber cloth
To supply water, always unplug the power then pour the water into the unit.
• Open the water hole cap of the steam cleaning vacuum tool.
• Use the measuring cup to pour 250cc of water and then close the water
hole cap tightly.
Before attaching the microfiber cloth, you must always turn off the power.
• After attaching the cloth on the cloth board, install it on the nozzle for
steam cleaning.
Be careful because the cloth board can be hot.
• After aligning the vacuum tool with the cloth board, press it from the top.
Until you hear the clicking sound.
CAUTION
To prevent safety accidents during steam cleaning, if you do not press the steam safety switch within 30 seconds, the unit will recognize
that the cleaning has been completed and turn off the power. If you want to use the steam again, press the “STEAM” button one more time.
• During initial steam nozzle operation, it will operate for 150 seconds (2.5 minutes) even when you do not press the steam safety switch.
• About 2 minutes after pressing the “STEAM” button, you can start the cleaning and after about 2.5 minutes, you can visibly see the steam.
• The cloth can get wet faster depending on how the steam vacuum tool is used and the time. At this time, when you replace the cloth, you
can clean with a dry cloth.
Steam safety switch