LG VC53 Series, Руководство по обслуживанию

Страница: 8 / 21

3. Replacement of motor
1) Disassemble the motor assembly as shown in the
figure
.
2) For re-assembly after disassembling the motor
cover, do so in the reverse sequence and insert
the packing seal, motor and mount packing. During
the assembly, make sure to prevent the packing
seal and motor mount packing from dropping out
(which may reduce the suction force).
4.Replacement of PWB Assembly
1) After removing the cable on board (Page 6)
2) Loosen the 1 screw fixing the board.(with
FAB3X8: 2 pieces, type drive)
3) Re-assemble PWB Assembly.
Do insert rubber Gasket before assembling PWB
Assembly.
Damper, Motor Mount
Motor
Packing seal
Chamber
PCB
- 7 -