background image

-16-

TROUBLESHOOTING

Review this chart to find do-it-yourself solutions for a minor performance problems. Additional
service needed, other than those described in this owner's manual, should be performed at an
authorized LG Electronics Service agency.

WARNING

Electrical shock and personal injury hazard.

Disconnect electrical supply before servicing or cleaning the unit. Failure to
do so could result in electrical shock or personal injury.

PROBLEM

POSSIBLE CAUSE

POSSIBLE SOLUTION

CLEANER WILL
NOT RUN

POOR JOB OF
DIRT PICKUP

DUST ESCAPES
THE DUST BIN

1. Unplugged at wall outlet.
2. Switch in off position.
3. Thermal protector activated.

1. Full or clogged dust bin.
2. Broken agitator belt.
3. Clogged hose or nozzle.
4. Hose not inserted fully
5. Worn agitator.
6. Hole in hose
7. Dust bin assembly improperly

installed.

8. Belt not installed on motor shaft. 
9. Motor protection system

activated.

1. Dust bin assembly improperly

installed.

1. Plug in firmly, check Motor protection system / fuse.
2. Push switch to floor or carpet mode.
3. See "To correct problem", page 9.

1. Empty dust bin and clean the filters.
2. Replace agitator belt.
3. Clean hose or nozzle area.
4. Insert hose.
5. Replace agitator.
6. Replace hose.
7. Properly install dust bin assembly.

8. Install belt on the motor shaft.
9. Check for clogs.

1. Properly install dust bin.

Disposal of your old appliance

1. When this crossed-out wheeled bin symbol  is attached to a product

it means the product is covered by the European Directive
2002/96/EC.

2. All electrical and electronic products should be disposed of

separately from the municipal waste stream via designated
collection facilities appointed by the government or the local
authorities.

3. The correct disposal of your old appliance will help prevent potential

negative consequences for the environment and human health.

4. For more detailed information about disposal of your old appliance,

please contact your city office, waste disposal service or the shop
where you purchased the product.

Содержание V-FA282FT






















Отзывы: