LG V-C4062H Series, Руководство пользователя

Страница: 12 / 26

E
Connecting the flexible hose
Push the end of the head (1) on the flexible
hose (2) into the attachment point on the
vacuum cleaner.
To remove the flexible hose from the
vacuum cleaner, press on the button
(3)
situated on the head, then pull upwards.
Assembling the tubes
(depending on model)
• Metal tube (4,5)
- Fit together the two tubes by twisting
slightly.
• Telescopic tube (6)
- Push spring latch (7) .
- Pull out tube to required length.
- Release spring latch to lock.
Using the cleaning head and
Accessory Nozzles
(depending on model)
Fit the large cleaning head onto the end of
the tube.
• The 2 position head (10) is equipped
with a pedal (11) which allows you to alter
its position according to the type of floor to
be cleaned.
Hard floor position (tiles,
parquet floors...) Press on the pedal to
lower the brush. Carpet or rug position:
Press on the pedal to lift the brush up.
• Crevice Tool (14)
For vacuuming in those normally
inaccess-ible places i.e. reaching
cobwebs, or down the side of a sofa!
• Upholstery Nozzle (15)
For vacuuming upholstery, mattresses,
etc. The thread collectors help to pick up
the threads and fluff.
• Dusting brush (16)
For vacuuming picture frames furniture
outlines, books and other uneven objects.
• Accessory Holder can be attached on
the Extention wands using clamping hook.
Accessories can be stored in the holder
(30) .
• Bent tube (34)
The Bent tube is used to clean easily
under sofa, table and bed.
Connect the bent tube to the hose and
connect the telescopic tube to the bent
tube (You can also connect the telescopic
tube to the hose without bent tube).
If you draw the latch lock, the bent tube is
curved. If you stretch the bent tube, it
returns to its original position.
How to plug in and use
Pull out the mains lead to the desired length
and plug into the socket.
Press button (17) to start the vacuum
cleaner. To stop it press the button (17)
again.
Adjusting the power level
(depending on model)
• Suction capacity increases steplessly up
to MAX (19) .
• The flexible hose handle (20) has a
manual air flow regulator (21) which
allows you to briefly reduce the suction
level.
Carrying and storage
When you have switched off and unplugged
the appliance, press on the button
(18) to
automatically rewind the cord.
• Use stowage clip as shown when storing
the cleaner (22) .
Changing the dust bag
The dustbag needs changing when the
cleaner is set to maximum power and the
cleaner head is off the floor but the "bag
full" indicator window
(23) is completely
coloured red.
Even if the dustbag does not appear to be
full at this stage, it should be changed. It
could be that a great deal of very fine dust
has clogged up the pores of the dust bag.
• Turn off the appliance and unplug it.
• Remove hose.
• Open the cover (24) .
- 12 -
How to Use