LG UW34 Series, Руководство по установке

Страница: 25 / 40

25
INSTALLATION MENU
ENGLISH
• Type of Connector: D-Sub 9-Pin Male
Male connector on box, viewed
towards connector.
1 5
6 9
No. Signal Signal requirements
1 VCC
2 RX RS232 Standard RS232 specification
3 TX RS232 Standard RS232 specification
4 IR from TV
5 GND Power ground
6, 8 Not connected
7 2 A +5VDC 10%, max 100mV ripple
9 1.5 A +12VDC 10%, max 100mV ripple
One Channel Map
-
If ‘One Channel Map’ is ‘Enable’, the TV will operate as below.
• A. When the TV is auto-scanning, it searches both air and cable channels.
• B. User can assign a channel number him/herself by manual scan.
• C. In ‘Programme Edit’ window, all channels are shown in a single list regardless of input source.
• D. Automatically scanned channels may not have the user-desired channel numbers.
-
If user change the ‘Yes/No’ value, an pop-up window will be displayed to warn that all channel
information will be deleted. The Default value is ‘Yes’.