LG UW34 Series, Руководство по установке

Страница: 24 / 40

24 INSTALLATION MENU
ENGLISH
Room Number Setting
-
Press the ‘OK’ button in Room Number Setting item to go to the ‘Change a room number’ menu.
- You can set or change Label and Room Number using the Room Number Setting.
GENERAL
Configuration Setup
Select RCU
- It is a mode to set whether to use Select RCU or not. When ‘Select RCU’ is set to ‘Enable’, You can adjust ‘Number of RCU’ menu.
Number of RCU
- It is a mode to set Number of RCU.
Number of RCU value range 1~9. (When ‘Select RCU’ is set to ‘Enable’)
Number of RCU value range 0. (When ‘Select RCU’ is set to ‘Disable’)
* RCU(Remote Control Unit) : It is special RCU that operates only setted number of RCU in TV.
RS232 DC Power Outlet (Except for LW76**)
-
It is a mode to decide whether to output DC or not for power supply to IB Box in Installation Menu. We offer a output terminal in one Pin of
RS232C Jack for the use of communication.
-
5 V DC Power Outlet and 12 V DC Power Outlet must operate mutually exclusively. That is, only one of the two sides must be turned on.
►
You can select ‘ OFF ’, ‘5 V’ or ‘12 V’ by pressing button.
• When select ‘5 V’ the 5 V is forwarded through the port. when select ‘12 V’ the 12 V is forwarded through the port.
RS-232CIN
(CONTROL & SERVICE)
Interface box