background image

7

ELECTRICAL SAFETY

ENGLISH

!

ELECTRICAL SAFETY

WARNING

• This appliance must be properly grounded. To minimize the risk of electric shock, you must always

plug into a grounded outlet.

• Do not cut or remove the grounding prong from the power plug.  

• Attaching the adapter ground terminal to the wall receptacle cover screw does not ground the appli-

ance unless the cover screw is metal and not insulated, and the wall receptacle is grounded through
the house wiring.

• If you have any doubt whether the air conditioner is properly grounded, have the wall receptacle and

circuit checked by a qualified electrician.

Temporary Use of an Adapter

We strongly discourage the use of an adapter due to potential safety hazards. For temporary con-

nections, use only a genuine adapter, available from most local hardware stores. Ensure that the

large slot in the adapter is aligned with the large slot in the receptacle for a proper polarity con-

nection.

To disconnect the power cord from the adapter, use one hand on each to avoid damaging the

ground terminal. Avoid frequently unplugging the power cord as this can lead to eventual ground

terminal damage.

WARNING

• Never use the appliance with a broken adapter.  

Temporary Use of an Extension Cord

We strongly discourage the use of an extension cord due to potential safety hazards.

WARNING

• 

This appliance should be installed in accordance with national wiring regulations.

This guide acts as a guide to help to explain product features.

Symbols used in this Manual

This symbol alerts you to the risk of electric shock. 

This symbol alerts you to hazards that may cause harm to the air conditioner.

This symbol indicates special notes.

!

!

!

!

Содержание USNH2465NW0





















Отзывы: