background image

6

SAFETY INSTRUCTIONS

•  Do not leave the appliance door open. Children may hang on the door 

or crawl inside the appliance, causing damage or injury.

•  Do not put in, wash or dry articles that have been cleaned in, washed 

in, soaked in, or spotted with combustible or explosive substances 

(such as waxes, wax removers, oil, paint, gasoline, degreasers, 

drycleaning solvents, kerosene, petrol, spot removers, turpentine, 

vegetable oil, cooking oil, acetone, alcohol, etc.). Improper use can 

cause fire or explosion.

• Do not use or store flammable or combustible substances (ether, 

benzene, alcohol, chemical, LPG, combustible spray, gasoline, 

thinner, petroleum, insecticide, air freshener, cosmetics, etc.) near 

the appliance.

• Never reach into the appliance while it is operating. Wait until the 

drum has completely stopped.

• Do not touch the door during a high temperature programme.
• In case of a water leak from the appliance or flood, disconnect the 

power plug and contact the LG Electronics customer information 

centre.

• Turn off water taps to relieve pressure on hoses and valves and to 

minimize leakage if a break or rupture should occur. Check the 

condition of the fill hoses; they should be replaced after 5 years.

•  If there is a gas leakage (isobutane, propane, natural gas, etc.) within 

the home, do not touch the appliance or power plug and ventilate the 

area immediately.

•  If the drain hose or inlet hose is frozen during winter, use it only after 

thawing.

• Keep all washing detergents, softener and bleach away from 

children.

• Do not touch the power plug or the appliance controls with wet 

hands.

•  Do not bend the power cable excessively or place a heavy object on it.
• Avoid touching any water that is drained from the appliance during 

the wash.

Содержание TV2425NTWB









































Отзывы: