Installation check list
Configuration
System Design
Applications
Introduction
• Dip s/w Setting
OFF
ON
1
2
3
4
5
6
7
8
• Installing external pump
External pumpis to be installed for cases where hot water needs to be circulated in large rooms.
For rooms with long loops, install an external pump along with a buffer tank in order to secure needed
flow and to ensure that flow to be provided to the product is larger than rated flow.
Power and control of External pump shall be configured separately from own product.
Set up link to 3
rd
Party controller or thermostat to operate external pump as needed.
OFF
ON
1
2
3
4
5
6
7
8
Indoor unit
External pump
Buffer tank
External pump
Buffer tank
Thermost
at
DDC Controller
Field installation (3
rd
Party)
- External pump
- DDC controller (option)
- Thermostat (option)
- Electric Power
Additional power
• Installer setting: N/A.
• System diagram
Smart ThinQ
IDU
Purpose:
Enabling remote system operation from smartphone.
Available functions include selection of
operation mode, DHW, temperature setup and scheduling.
• Necessary configuration and feature
Dip s/w
Separate setup is required
Default
Remote controller
Use the default one attached to indoor
unit
Leaving water tempera-
ture
Set up by remote controller and Wi-Fi
configuration
1zone : Single temperature
Control
Control of leaving water temperature
Wi-Fi controller
To be purchased and installed sepa-
rately
Wi-Fi Modem (WLANDongle)
P/N : PWYREW000 (Cable)
Installer setting
Remote controller needs to be set
up separately.
A network-enabled smartphone, a router, the LG SmartThinQ app and a Wi-Fi modem are needed in
order to use the app and its functions.
038
039
_
COMPREHENSIVE APPLICATION AND INSTALLATION MANUAL
LG Electronics
11. System 11
