LG TDW15116G, Руководство пользователя

Страница: 25 / 64

25
OPERATING YOUR DRYER Part 8
Manual Preset Cycle Settings
Manual Dry
Cycles Load Type
Type of Load
Temp.
Default Time*
(Minutes)
High
Medium
High
Air Dry
25
20
30
SPEED DRY
SMALL LOADS
FRESHEN UP
Remove Wrinkles
AIR DRY
Default Time*
(Minutes)
Foam rubber-pillows,
padded bras, stuffed toys
20 - 30
20 - 30
40 - 50
10 - 20
Plastic-Shower curtains,
tablecloths
Rubber-backed rugs
Olefin, polypropylene,
shear nylon
Option Button
7
Beeper On/Off 8
1. CUSTOM PROGRAM.
2. Wrinkle Care
Custom Programming Set up
your favorite combination
of settings and save them here for
one-touch recall.
This option helps to prevent the wrinkle on
your laundry.
When you select the wrinkle free option, the
dryer will periodically tumble for up to three
hours after the cycle has completed.
You can use this option in case that you can not remove laun-
dry after drying is done.
1. Select a cycle
2. Change DRY LEVEL and TEMP. CONTROL.
3. Select OPTIONS you want.
4. Press and hold the CUSTOM PROGRAM.
To recall your stored CUSTOM PROGRAM
Press CUSTOM PROGRAM button, then press
START/PAUSE.
Child Lock 6
Child Lock can be used to prevent
your children from undesirable use
on control panel while the dryer is
running.
When Child Lock is enabled, all the
button will be locked and Child Lock glows. To lock Child,
Press and hold Dry Lavel and Temp. Control for 3 seconds, A
single beep tone is heard and CL is displayed on the status
window. To unlock Child Lock, press and hold Dry Lavel and
Temp. Control for 3 seconds again.
The BEEPER controls the
volume of the beep that is made
when you press any of the
buttons on the control panel and
the termination of any cycle is
indicated.
Press BEEPER to adjust the
sound level or turn off the signal.
Drying Time Control 9
Use Time Dry Option to change
Drying Time on your own. You
can select the desired operation
time manually by pressing Time
Dry button which ranges from 20
to 60 minutes.
Temp. Control
10
Use Time Control Option to
select temperatures for the
Manual Cycles. Press TEMP.
CONTROL until the desired
temperature setting glows.
Temperature modifiers cannot
be used with the Sensor Dry
Cycles.