LG TD-V700E, Инструкция по использованию и уходу

Страница: 17 / 28

C
aring for your dryer
16
Clean filter
This lamp blinks at the start of each use just to remind
you to clean filter.
1. Open the door.
2. Pull the filter
out.
3. Clean the filter
by using a
vacuum cleaner
or rinsing under
the tap.
How important Care and cleaning is~
It’s not very difficult to care for your dryer. All you
have to do is to follow the information below.
Clean Lint Filter
Clean lint filter after each use and check it before
each use. It should also be cleaned if the “Clean
Filter” light becomes illuminated and the buzzer
sounds during operation of the dryer:
Cleaning or emptying the filter will reduce drying
times and energy consumption and lengthen the
dryer life.
4. Insert the
filter.
- Push the
filter all the
way down to
avoid
Interference
with the
door.
Moisture Sensor
This device functions to sense the moisture
remaining contents of the laundry during operation
which means it must be cleaned all the time. The
main reason of cleaning this part is to remove the
build-up of lime scale on the surface of sensor. Wipe
the sensors inside drum (Shown in the picture).
Note
In the case you wash the lint screen using
water, remove the water in the screen
thoroughly.
5. Close the door.
C
ar
in
g
fo
ry
ou
rd
ry
er