LG TD-V10115E, Руководство пользователя

Страница: 9 / 32

8
INITIAL STEPS FOR INSTALLING YOUR DRYER Part 3
The following instructions will help guide you through the initial steps of setting up your dryer for use.
Please note that every section of this manual provides important information regarding the preparation and
use of your dryer, and it is important that you review this entire manual before proceeding with any
installation or use. More detailed instructions concerning electrical connections, gas connections, and
exhaust requirements are provided at other parts of this manual.
Choose a location with a solid floor for your dryer.
Place the dryer at least eighteen inches above the
floor for a garage installation. After placing the
dryer in the desired location, please make sure that
it has the required clearances shown below, and
sections on Exhaust and Maintenance requirements.
If you are installing your dryer in a manufactured or
mobile home, please refer to STEP 9 below for
additional instructions.
Most installations require a minimum 5 1/2 in.
(14 cm) clearance behind the dryer for the exhaust
vent with elbow.
Positioning the Dryer. STEP 1
29 "
(73.7cm)
43.7 "
(111 cm)
27 "
(68.6cm)
51
"
(129.5cm)
Ventilation
hole
Ventilation
hole
Certain minimum clearances are required
above, behind, and to the sides of the unit, as
shown below.
Those required minimum clearances
are set forth in the picture below. Please also keep the
following instructions in mind when installing in a
closet or recessed area:
Consider allowing additional clearance for
installation and servicing.
Wall, door and floor molding may force additional
clearances.
An additional inch of clearance is recommended to
minimize noise transfer .
Consider space needed for companion appliances.
For closet installations, the picture below shows the
minimum required ventilation openings for the door.
A louvered door with comparable ventilation openings
is also acceptable.
<Closet-Front view>
<Closet door> <Closet-Side view>
Note
Leveling legs should be secured.
All four legs are stably placed on the solid and
even floor.
If dryer is not level, laundry may not tumble
properly and sensor will not detect the accurate
humidity information.
When adjusting leveling, please be cautious not to
have serious injuries on your fingers and toes.