17
EN
Restarting the Air Conditioner
Automatically
When the air conditioner is turned on again
after a power failure, this function restores the
previous settings.
Disabling Auto Restart
1
Open the front cover (Type2) or horizontal
vane (Type1).
2
Press the
ON/OFF
button and hold it for 6
seconds, then the unit will beep twice and
the lamp will blink twice 4 times.
•
To re-enable the function, press the
ON/
OFF
button and hold it for 6 seconds. The
unit will beep twice and the lamp will blink
4 times.
Type1
ON/OFF
Type2
ON/OFF
NOTE
•
The feature may be changed according to the
type of model.
•
If you press and hold the
ON/OFF
button for 3
– 5 seconds, instead of 6 seconds, the unit
will switch to the test operation. In the test
operation, the unit blows out strong cooling air
for 18 minutes and then returns to factory
default settings.
Using the Mode Function
This function allows you to select the desired
function.
Cooling Only Model
Cooling Mode
Auto Operation(AI) Mode
Dehumidification Mode
Fan Mode
Cooling & Heating Model
Cooling Mode
Auto Changeover Mode
Dehumidification Mode
Heating Mode
Fan Mode
Cooling Mode
1
Turn the appliance on.
2
Press
MODE
button repeatedly to select the
Cooling Mode.
•
is displayed on the display screen.
3
Press
or
button to set the desired
temperature.
