background image

21

EN

Adding Fabric Softener

 

Dilute fabric softener with water. Undiluted

fabric softener may result in spots that look

like oil stain.

 

Measure and add the recommended amount

of fabric softener into the compartment

marked with this symbol ( 

 ).

 

Follow manufacturer’s direction.

 

Fabric softener is automatically dispensed in

the final rinse with indication beep.

 

If you want extra rinse, you must add fabric 

softener manually when indication beep 

rings in the final rinse. This maximizes the 

fabric softener function.

 

Do not overfill. The dispenser holds max 35

mL. Never add more than 35 mL. Overfilling

can cause early dispensing of the fabric

softener which could result in stained clothes.

A cup with a pouring spout will help you avoid

spelling.

 

The effect of adding fabric softener may vary

according to its viscosity. The sticker fabric

softener makes its effect lower. For a sticky

softener it is recommended that it be diluted

with water, then be manually put during the

time when the washer beeps several times

before the final rinse. This function informing

correct time dispense manually is optionally

applied to some models. Please keep it in

mind that fabric softener has to be diluted with

water before dispensed and poured directly on

clothes.

NOTE

 

Do not mix with detergent or bleach.

 

Never pour fabric softener directly on clothes.

It may stain them.

 

Do not stop the washer during the first spin for

timely dispensing.

 

Option washing is not designed to be used

with fabric softener dispenser.

Adding Liquid Bleach

 

Check clothing care label for special

instructions and separate the laundry to be

bleached.

 

Dilute liquid chlorine bleach.

 

Measure the recommended amount of liquid

bleach carefully following instructions on the

bottle.

 

Before starting the washing machine, pour the

measured amount of bleach directly into the

bleach dispenser. Avoid splashing or

overfilling. Powdered bleach should be mixed

with water before being poured into the

dispenser.

NOTE

 

Never pour undiluted liquid bleach directly

onto clothes or into the wash basket. This

may cause change of color or damage the

laundry.

 

Do not pour powdered bleach into the bleach

dispenser.

Содержание T2108VS2M













































Отзывы: