background image

18

Air Conditioner

Maintenance and Service

Air Filters

The air filters behind the front panel / grill should be checked and cleaned once in every
2 weeks or more often if necessary. To remove the filters see the self
explanatory diagrams for each model type. Clean the filters with a
vacuum cleaner or warm soapy water. If dirt is not easily removed,
wash with a solution of detergent in luke warm water. Dry well in
shade after washing and reinstall the filters back in place.

Plasma Filter

The plasma filters behind the air filter should be checked and cleaned once in
every 3 months or more often if necessary. To remove the filters see the self
explanatory diagrams for each model type. Clean the filters with a vacuum
cleaner. If it is dirty, wash it with water and dry well in shade and install back in
place.

Allergy Triple Filter 

Remove the Allergy Free Triple Filter behind the air filter and
expose them in direct sunlight for 2 hours. 
And then insert these filters into original position.

Clean the unit with a soft dry cloth. Do not use bleach or abrasives.

Never use any of these 
• Water hotter than 40°C. It may cause deformation and discoloration.
• Volatile substances. They may damage the surface of the air conditioner.

If you want to open inlet grille, support it with supporter.
Otherwise the inlet grille may fall and result in severe injury.

NOTE

Maintenance and Service

Indoor Unit

Before performing any maintenance, turn off the main power to the system, disconnect the circuit breaker and 
unplug the power cord.

Supporter

Содержание T182 SCO Series
























Отзывы: