To cancel the timer setting
•
The sleep mode will operate indoor fan at super low speed in cooling mode and at low speed in heating
mode for pleasant sleep.
In cooling mode or healthy dehumidification mode:
The setting temperature will rise automatically two times by 1°C over next consecutive 30 minutes
(Maximum 2°C) for a comfortable sleep. This will be the final setting temperature as long as sleep mode is
functioning.
NOTE
Press the SLEEP MODE AUTO BUTTON to set the time when you want the unit to stop
automatically. The timer is programmed in one-hour increments by pressing the
SLEEP MODE AUTO BUTTON 1 to 7 times. The sleep mode is available for 1 to 7 hours.
Sleep Mode Operation
Timer Setting Operation
1
Make sure to set current time correctly on the display of the remote controller..
2
Press 2nd F button.
3
Press the ON/OFF TIMER BUTTONS to turn timer on or off.
4
Press the TIME SETTING BUTTONS until the desired time is set.
5
To set the selected time, press the TIMER SET BUTTON aiming the remote
controller at the signal receiver.
Description
Button on the
Remote Controller
ON
OFF
CANCEL
SET
Check if icon is off.
Press the TIMER CANCEL BUTTON aiming the remote controller at the signal receiver.
(The timer lamp on the air conditioner and the display will go off.)
CANCEL
SET
Delay off timer
Delay on timer
Delay off and on timer
Delay on and off timer
Select one of the following four types of operation.
NOTE
Operating Instructions
1
5
Owner’s Manual
ENGLISH
