LG S09AF, Руководство пользователя

Страница: 9 / 19

Owner's Manual 9
Operating Instructions
ON
OFF
CANCEL
AUTO CLEAN
SET
Cooling Operation
Auto Operation or Auto Changeover
Healthy Dehumidification Operation
Flip-up door
(opened)
Heating Operation
Signal transmitter
• Cooling Model( ), Heat Pump Model( )
Operation Mode
The controls will look like the following.
Wireless Remote Controller
START/STOP BUTTON
Used to turn off/on the unit.
OPERATION MODE SELECTION BUTTON
Used to select the operation mode.
ROOM TEMPERATURE SETTING
BUTTONS
Used to select the room temperature.
INDOOR FAN SPEED SELECTOR
BUTTON
Used to select fan speed in four steps
low, medium, high and CHAOS.
JET COOL/HEAT BUTTON
Used to start or stop the speed
cooling/heating.
(It operates fan in super high speed)
CHAOS SWING BUTTON
Used to stop or start louver movement and
set the desired up/down airflow direction.
ON/OFF TIMER BUTTONS
Used to set the time of starting and stopping
operation.
TIME SETTING BUTTONS
Used to adjust the time.
TIMER SET/CANCEL BUTTON
Used to set and to cancel the timer
operation.
SLEEP MODE AUTO BUTTON
Used to set sleep mode auto operation.
AIR CIRCULATION BUTTON
Used to circulate the room air without cooling or
heating.
ROOM TEMPERATURE CHECKING
BUTTON
Used to check the room temperature.
RESET BUTTON
Used prior to resetting time.
2nd F BUTTON
Used prior to using modes printed in blue at
the bottom of buttons.
AUTO CLEAN BUTTON
Used to set auto clean mode.
In some models this button has a 2nd function
of LED luminosity control.
To use the functions printed in blue at the bottom of the buttons press 2
nd
F button first and then the required function
button. Pressing the 2 nd F button activates the blue printed function of the respective button. To cancel the function
press the 2nd F button again else it will automatically cancel if remains idle after 10 seconds.
NOTE
CANCEL
SET