LG RV1865ESZ, Руководство пользователя

Страница: 21 / 40

21
Connecting electric dryers
w
WArNiNg
To help prevent fire, electric shock, serious injury, or death, the
wiring and grounding must conform to the latest edition of the
National Electrical Code, ANSI/NFPA 70 and all applicable local
regulations. Please contact a qualified electrician to check your
home’s wiring and fuses to ensure that your home has adequate
electrical power to operate the dryer.
electrical requirements for electric models only
w
WArNiNg
To reduce the risk of fire, electric shock, or injury to persons when
using this appliance, follow basic precautions, including the
following:
220V, 60Hz
• This dryer must be connected to a grounded metal,
permanent wiring system, or an equipment-grounding
conductor must be run with the circuit conductors and
connected to the equipment-grounding terminal or lead on
the dryer. Failure to do so can result in fire, explosion, or death.
•
If branch circuit to dryer is 15 ft. (4.5 m) or less in length,
use UL (Underwriters Laboratories) listed No.-10 AWG wire
(copper wire only), or as required by local codes. If over 15 ft.
(4.5 m), use UL-listed No.-8 AWG wire (copper wire only), or
as required by local codes. Allow sufficient slack in wiring so
dryer can be moved from its normal location when necessary.
Failure to do so can result in fire, explosion, or death.
•
Do not, under any circumstances, cut or remove the third
(ground) prong from the power cord.
Failure to follow this
warning can result in fire, explosion, or death.
• For personal safety, this dryer must be properly grounded.
Failure to follow this warning can result in fire, explosion, or death.
• The power cord of this dryer is equipped with a 3-prong
(grounding) plug which mates with a standard 3-prong
(grounding) wall outlet to minimize the possibility of electric
shock hazard from this appliance. Failure to follow this warning
can result in fire, explosion, or death.
•
This dryer must be plugged into a 60Hz, 220VAC, grounded
outlet protected by a 13-ampere fuse or circuit breaker.
Failure
to follow this warning can result in fire, explosion, or death.
•
Where a standard 2-prong wall outlet is encountered, it
is your personal responsibility and obligation to have it
replaced with a properly grounded 3-prong wall outlet.
Failure
to follow this warning can result in fire, explosion, or death.
electrical connection
w
WArNiNg
To reduce the risk of fire, electric shock, or injury to persons when
using this appliance, follow basic precautions, including the
following:
• Do not modify the plug and internal wire provided with the
dryer.
• The dryer should be connected to 3-hole outlet.
• If it does not fit the outlet, a proper outlet will need to be
installed by a qualified electrician.
w
WArNiNg
To reduce the risk of fire, electric shock, or injury to persons when
using this appliance, follow basic precautions, including the
following:
• Any installation in a manufactured or mobile home must
comply with the Manufactured Home Construction and
Safety Standards Title 24 CFR, Part 3280 or Standard CAN/
CSA Z240 MH and local codes and ordinances.
Plug dryer into a 220VAC,
60-Hertz grounded 3-prong
outlet.
iNSTALLATiON iNSTruCTiONS iNSTALLATiON iNSTruCTiONS