background image

8

PRODUCT FEATURES

EASY-TO-uSE CONTrOL PANEL

Rotate the cycle selector knob to select the desired dry cycle. Add cycle options or adjust settings with the touch of a button.

EASY-ACCESS rEVErSiBLE DOOr

The wide-opening door provides easy access for loading and unloading. The door hinge can be reversed to adjust for installation location.

STEAM FuNCTiONS

LG’s steam technology allows you to inject fabrics with a swirling jet of hot steam to refresh clothes, reduce static, and make ironing 
easier. Simply select the STEAM FRESH™ cycle, or you can add a Steam option to selected cycles.

FLOW SENSE™ DuCT BLOCKAgE SENSiNg SYSTEM iNDiCATOr

The FLOW SENSE™ duct blockage sensing system detects and alerts you to blockages in the ductwork that reduce exhaust flow from the 
dryer. Clean exhaust systems increase efficiency and reduce drying times.

SMArTDiAgNOSiS™

Should you experience any technical difficulty with your dryer, it has the capability of transmitting data via your telephone to the 
Customer Information Center. The call center agent records the data transmitted from your machine and uses it to analyze the issue, 
providing a fast and effective diagnosis (refer to page 36).

PrODuCT FEATurES

Содержание RV1365ESZ









































Отзывы: