VCR Connection and Viewing Setup
18
- In Video mode, TV automatically reverts to TV mode if the fcr button or flashbk buttons are pressed.
- See following pages to connect to other A/V external equipment to input jacks on the TV.
1
Connections
●
Connect the audio/video output jacks on VCR to the corresponding input jacks on the TV.
2
Viewing Setup
Watching TV programs
Turn the TV on and tune to a channel.
Watching VCR
a. Use
tv/video
button on the remote control to select TV (Ant In.) or Video source,
depending on connection setup: 1 or 2.
- Connection 1: Set VCR switch to 3 or 4 and then tune TV to the same channel number.
- Connection 2: Select VIDEO source input to use Audio/Video In connections.
b. Insert a video tape into the VCR and press the PLAY button.
Connecting a VCR
Connecting a VCR
L
OUT
IN
CH3
CH4
S-VIDEO
ANT IN
ANT OUT
(R)
(L)
AUDIO
VIDEO
+
75
Ω
ANT IN
S-VIDEO
H/P
AC INPUT
VIDEO IN
R
L
P
B
VIDEO
(MONO)
COMPONENT(480i)
DVD/DTV IN
AUDIO
Y
P
R
1
Typical
Antennas
VCR Connection Panel
Direct
connection
2