LG REFRIGERATOR Скачать руководство пользователя страница 28 | Manualshive

Страница: 28 / 69

background image

8-1-14 TEST Mode

1. The Test mode allows checking the PCB and the function of the product as well as finding out the defective part in case of

an error.

2. The test mode is operated by pressing two buttons at Display panel.
3. While in the test mode, the function control button is not recognized, but the recognition tone (beep~) sounds.
4. After exiting the test mode, be sure to reset by unplugging and then plugging in the appliance.
5. If an error, such as a sensor failure, is detected while in the test mode, the test mode is cleared and the error code is

displayed.

6. While an error code is displayed, the test mode will not be activated.

NOTE : LED CHECK MODE: When the WARMER button in the refrigerator temperature control and the WARMER button in

the freezer temperature control are pushed and held for 1 second or longer, every LED on the display turns on at
the same time. When the buttons are released, the previous mode is restored.

* Freezer Fan RPM Variable Check:

In case the freezer fan is in operation when the WARMER KEY in Refrigerator and Freezer Temp. Control are pressed for
more than one second at the same time freezer fan RPM changes. (for example if high speed, to normal speed or if
normal speed, to high speed for 30 seconds)
After 30 seconds, it turns to its original RPM.

* Demostration MODE:

1. When the WARMER KEY of refrigerator Temp. control or of freezer Temp. control in the the warmest temperature

’

s

status are pushed and held for 3 seconds or longer, It converts to Demonstration Mode.

2. It shows OFF on the display panel.
3. In this status, all Loads are off (Compressor / Fan / Damper / Heater)

(Even is Demonstration Mode, the refrigerator Lamp automatic off function warks normally and can be demonstrated)

4. Exit the test mode and reset the display by pressing the COLDER and WARMER buttons.

- 28

-

MODE

MANIPULATION

CONTENTS

REMARKS

TEST1

TEST2

Reset

Push Express Freezing
key and COLDER KEY of
Freezer Temp. at the
same time over 3
seconds.

Push Express Freezing
key and COLDER KEY of
Freezer Temp. at the
same time over 3 seconds
in TEST MODE 1

Push Express Freezing
key and COLDER KEY of
Freezer Temp. at the same
time over 3 seconds. in
TEST MODE 2

1. Continuous operation of the

COMPRESSOR

2. Continuous operation of the freezer fan
3. STEPPING DAMPER OPEN
4. Defrosting Heater OFF
5. Every DISPLAY LED ON

1. COMP OFF
2. Freezer FAN OFF
3. STEPPING DAMPER CLOSE
4. Defrosting heater ON
5. DISPLAY LED shows

222

Reset to the previously setting before
TEST MODE

Reset if the
temperature of the
Defrosting sensor
is 46

°

F(8

°

C) or more.

The compressor will
Start after a 7-minute
delay.

«
...
26
27
28
29
30
...
»

Содержание REFRIGERATOR






































































Отзывы:

Нет отзывов

Похожие инструкции для REFRIGERATOR

Бренд: Saivod Страницы: 26

Бренд: True Страницы: 2

Бренд: Maytag Страницы: 36

Бренд: Waeco Страницы: 112

Бренд: Omcan Страницы: 24

Бренд: Zanussi Electrolux Страницы: 16

Бренд: Atlantic Страницы: 44

Бренд: Daewoo Страницы: 29

Бренд: Salora Страницы: 35

Бренд: Laurus Страницы: 184

Бренд: Interlevin Страницы: 40

Бренд: Concept2 Страницы: 17

Бренд: Danby Страницы: 16

Бренд: Hitachi Страницы: 60

Бренд: Hitachi Страницы: 60

Бренд: Hitachi Страницы: 68

Бренд: Hitachi Страницы: 60

Бренд: Hitachi Страницы: 56

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды