8
Installation Instructions
Earthing Instructions
This appliance must be earthed. In the
event of malfunction or breakdown, earthing
will reduce the risk of electric shock by
providing a path of least resistance for the
electric current.
This appliance is equipped with a earthed
cord and an earthing plug. The plug must be
plugged into an appropriate outlet that is
properly installed and earthed in
accordance with local Standards.
Additional Grounding Procedure
Some countries may require a separate
ground. In such cases, the required
accessory ground wire, clamp and screw
must be purchased separately.
Wall
30cm~50cm
Condensed Water Drain
This appliance can be plumbed directly into
the mains waste with the adaptor supplied.
Condensed water will drain away. A
plumber will be required.
NOTE
- For better drying performance,
please keep the rear of product
away from wall.
- Do not install the dryer where there
is a risk of frost or dust.
• The tumbles dryer may not be able
to operate properly or may be
damaged by freezing of condensed
water in the pump and drain hose.
WARNING
The dryer should not be installed next to
a refrigeration appliance.
Do not install the Heat Pump dryer
next to the high-temperature
appliance like refrigerator, oven or
stove etc.
which can cause poor drying
performance and programme
duration, and adversely affect the
proper functioning of the compressor.
The Heat Pump dryer performs best
at a room temperature of 23°C
WARNING
Avoid installing the product around a
heat source.
The rear side of the dryer must be well
ventilated.
If not, this may cause problems.
