6
■
Stacking Installation Instructions
Installation Instructions
The following instructions will guide you through the initial steps of setting up your dryer.
Please note that every section of this manual provides important information regarding the
preparation and use of your dryer, and it is important that you review this entire manual
before proceeding with any installation or use. Be sure to observe all listed warnings and
cautions. These installation instructions are intended for use by qualified installers. Read
these installation instructions completely and carefully.
Your dryer should not be located near to a
gas hob, cooker, heater or grill, as flames
from the burners could damage your dryer.
When the dryer is fitted beneath a work
surface, allow 30cm~50cm space at either
side of the dryer and at the back of the dryer
to allow air to exit the rear grille. This air
flow is critical for condensation of water
during the drying process.
If you use this dryer near or stacked on top
of your washing machine, separate main
plugs and sockets must be used for each
appliance. Do not use 2-way adaptor or
extension lead.
You can stack the dryer on top your
washing machine to save space. A stacking
kit is available from your local appliance
specialist.
Your LG dryer can be placed on top of a front loading washing machine and securely fixed
with a stacking kit (see following page for instructions). This installation must be conducted
by an experienced installer to ensure it has been installed correctly.
An installer will ensure you have the correct stacking kit for your model of washing
machine and will ensure it is firmly fixed. For these reasons, expert fitting is essential.
CAUTION
CAUTION Concerning the power cord
Most appliances recommend they be placed upon a dedicated circuit; that is, a single
outlet circuit which powers only that appliance and has no additional outlets or branch
circuits. Check the specification page of this owner's manual to be certain.
Do not overload wall outlets. Overloaded wall outlets, loose or damaged wall outlets,
extension cords, frayed power cords, or damaged or cracked wire insulations are
dangerous. Any of these could result in and electric shock or fire. Periodically examine
the cord of your appliance, and if its appearance indicates damage or deterioration,
unplug it, discontinue use of the appliance, and have the cord replaced with an exact
replacement part by an authorized servicer.
Protect the power cord from physical or mechanical abuse, such as being twisted,
kinked, trapped in a door, or walked upon. Pay particular attention to plugs, wall outlets,
and the point where the cord exits the appliance.
Safety Information
Risk of Injury
The dryer is very heavy so you shouldn’t
try to lift it alone.
Do not lift the dryer by grasping any of the
protruding parts, e.g. the jog dial or the
door, they may break off.
Risk of Falling or Tripping Up
Ensure there are no loose hoses or
cables.
Check the dryer for damage occurred
during transportation.
Do not connect the dryer if it has visible
signs of damage.
If you are not confident, contact your local
LG agent. Always empty the dryer
completely before transporting it.
