LG RC9041A, Руководство пользователя

Страница: 5 / 28

Safety Instructions
5
S
afety Instructions
• Items that have been spotted or soaked with vegetable or cooking oil constitute a fire hazard and
should not be placed in a tumble dryer.
• Items that have been soiled with substances such as cooking oil, acetone, alcohol, petrol,
kerosene, spot removers, turpentine, waxes and wax removers should be washed in hot water with
an extra amount of detergent before being dried in the tumble dryer.
May cause spontaneous combustion leading to explosion and fire
• Items that have been previously cleaned in washed in soaked in or spotted with
petrol/gasoline, dry cleaning solvents or other flammable or explosive substances
should not be used in a tumble dryer.
May cause spontaneous combustion leading to explosion and fire
• Items made of foam, rubber, plastic, or other heat-sensitive fabrics (such as bathroom
rugs,nonslip mats or raincoats) should not be dried in a tumble dryer on a heat setting.
• Items such as foam rubber (latex foam), shower caps, waterproof textiles, rubber
backed articles and clothes or pillows fitted with foam rubber pads should not be dried in
the tumble dryer.
May cause spontaneous combustion leading to explosion and fire
• Plastic articles such as shower caps or waterproof nappy covers should not be placed
in a tumble dryer.
May cause spontaneous combustion leading to explosion and fire
• If dryer is installed on a carpet, damage may be caused to it by ventilated air
May cause spontaneous combustion leading to explosion and fire
• Fabric softeners, or similar products, should be used as specified by the fabric softener
instructions.
• To reduce the risk of personal injury, adhere to all industry recommended safety proce-
dures including the use of long sleeved gloves and safety glasses.
Failure to follow all of the safety warnings in this manual could result in property
damage, personal injury or death.
• If this appliance is supplied from a cord extension set or an electrical connector, portable
outlet device must be positioned so that is not subject to splashing or ingress of moisture.
It may cause an electric shock, a filre, malfunction and deformation.