LG RC9011A, Руководство пользователя

Страница: 5 / 64

Safety
Instructions
5
S
F
afety Instructions
SAFETY INSTRUCTIONS FOR INSTALLATION
WARNING
To reduce the risk of fire, electric shock, or injury to persons when using this
appliance, follow basic precautions, including the following:
• To reduce the risk of electric shock, do not
install the dryer in humid spaces.
Failure to
follow this warning can cause serious injury, fire,
electrical shock, or death.
• Connect to a properly rated, protected, and
sized power circuit to avoid electrical overload.
Improper power circuit can melt, creating electrical
shock and/or fire hazard.
• Remove all packing items and dispose of all
shipping materials properly.
Failure to do so can
result in death, explosion, fire, or burns.
• Place dryer at least 18 in. above the floor for a
garage or basement installation.
Failure to do so
can result in death, explosion, fire, or burns.
• Keep all packaging from children. Packaging
material can be dangerous for children. There is a
risk of suffocation.
• Do not install nearby heat item. Such as stove,
cooking oven. Failure to do so can cause damage,
smoke, and fire.
• Do not place candle and cigarettes on top of the
product.
Failure to do so can cause damage,
smoke, and fire.
• Remove all protective vinyl film from the
product.
Failure to do so can cause damage,
smoke, and fire.
• Do not, under any circumstances, cut or remove the
ground prong from the power cord. To prevent
personal injury or damage to the dryer, the electrical
power cord must be plugged into a properly
grounded outlet.
• For personal safety, this dryer must be properly
grounded. Failure to do so can result in electrical
shock or injury.
• Refer to the installation instructions in this manual
for specific electrical requirements for your model.
Failure to follow these instructions can create an
electrical shock hazard and/or a fire hazard.
• This dryer must be plugged into a properly
grounded outlet. Electrical shock can result if the
dryer is not properly grounded. Have the wall outlet
and circuit checked by a qualified electrician to
make sure the outlet is properly grounded. Failure
to follow these instructions can create an electrical
shock hazard and/or a fire hazard.
• The dryer should always be plugged into its own
individual electrical outlet which has a voltage rating
that matches the rating plate. This provides the best
performance and also prevents overloading house
wiring circuits which could cause a fire hazard from
overheated wires.
• Never unplug your dryer by pulling on the power
cord. Always grip plug firmly and pull straight out
from the outlet. The power cord can be damaged,
resulting in a risk of fire and electrical shock.
• Repair or replace immediately all power cords that
have become frayed or otherwise damaged. Do not
use a cord that shows cracks or abrasion damage
along its length or at either end. The power cord
can melt, creating electrical shock and/or fire
hazard.
• When installing or moving the dryer, be careful not
to pinch, crush, or damage the power cord. This will
prevent injury and prevent damage to the dryer
from fire and electrical shock.
READ ALL INSTRUCTIONS BEFORE USE
SAVE THESE INSTRUCTIONS
SAFETY INSTRUCTIONS FOR INSTALLATION