Installation Instructions
Safety Information
Risk of Injury
The dryer is very heavy so you shouldn’t try to
lift it alone.
Do not lift the dryer by grasping any of the
protruding parts e.g. or the jog dial or the door.
they may break off.
Risk of Tripping
Ensure there are no loose hoses or cables.
Check the dryer for damage occurred
during transportation.
Do not connect the dryer if it has visible signs of
damage.
If you are not confident, contact your local LG
agent. Always empty the dryer completely
before transporting it.
The following instructions will guide you through the initial steps of setting up your dryer.
Please note that every section of this manual provides important information regarding the preparation and
use of your dryer, and it is important that you review this entire manual before proceeding with any
installation or use. Be sure to observe all listed warnings and cautions. These installation instructions are
intended for use by qualified installers. Read these installation instructions completely and carefully.
Your dryer should not be located near to a gas
hob, cooker, heater or grill, as flames from the
burners could damage your dryer. When the dryer
is fitted beneath a work surface, allow
30cm~50cm space at either side of the dryer and
at the back of the dryer to allow air to exit the rear
grille. This air flow is critical for condensation of
water during the drying process.
If you use this dryer near or stacked on top of
your washing machine, separate main plugs and
sockets must be used for each appliance.
Do not use 2-way adaptor or extension lead.
You can stack the dryer on top your washing of
washing machine to save space. A stacking kit is
available from your local shop.
6
I
nstallation Instructions
CAUTION
CAUTION Concerning the power cord
Most appliances recommend they be placed upon a dedicated circuit; that is, a single outlet circuit which
powers only that appliance and has no additional outlets or branch circuits. Check the specification page
of this owner's manual to be certain.
Do not overload wall outlets. Overloaded wall outlets, loose or damaged wall outlets, extension cords,
frayed power cords, or damaged or cracked wire insulation are dangerous. Any of these could result in
electric shock or fire. Periodically examine the cord of your appliance, and if its appearance indicates
damage or deterioration, unplug it, discontinue use of the appliance, and have the cord replaced with an
exact
replacement part by an authorized servicer.
Protect the power cord from physical or mechanical abuse, such as being twisted, kinked, trapped in a
door, or walked upon. Pay particular attention to plugs, wall outlets, and the point where the cord exits
the appliance.
Содержание RC8015
Страница 24: ......