LG RC8015, Инструкция по использованию и уходу

Страница: 12 / 24

Operating Y
our
Dryer
12 12
O
perating Your Dryer
5. Close the door.
Before you close the door, make sure fabrics
are well placed inside and that foreign objects,
especially flammable ones, are not caught
around door.
6. Select the drying cycle you want.
You can choose a cycle by turning the program control
knob until the required program is indicated.
If you press Start/Pause button without choosing a cycle,
the dryer will proceed with the Cupboard program. [Please
refer to Cycle Selection table (page 10) for the detailed
information.
7. Press the start button.
You will hear drum rotating.
8. After the cycle has finished, open the
door and remove the laundry.
Careful! the drum inside could still be hot.
(Operation time varies depending on your cycle
selection or options.)
9. Clean the lint filters and
empty water container.
The lint filter should be cleaned after each load.
10. Turn off the dryer.
Press the ‘‘Power’’ button.
Select the
desired
cycle.
Take out
the laundry.
Clean the
door lint
filter.
- Be careful not to trap laundry between the
loading door and rubber seal.
CAUTION
- if using a vacuum cleaner to clean the lint as
it is easily damaged and torn. If there is a
residue build up on the filter, scrub the lint
screen with a brush to remove.
- If you want to open the door while dryer is
operating, please press the Start/Pause
button first, wait until drum completely stops
and then open the door.
CAUTION
It must not be used for purposes other than
those for which it was designed.
CAUTION
Note
The final part of a tumble dryer cycle occurs
without heat (cool down cycle) to ensure that
the items are left at a temperature that will not
damage them.
Never stop a tumble dryer before the end of
the drying cycle unless all items are quickly
removed and spread out so that the heat is
dissipated.
WARING