background image

4

Air Conditioner

Safety Precautions

• Improper or loose connections can cause heat  generation or fire.

Safely dispose off the packing materials. Like screws, nails, batteries, broken things etc after installation or svc and
then tear away and throw away the plastic packaging bags.

• Children may play with them and cause injury.

Make sure to check that the power cable plug is not dirty, loose or broken  and  then only insert the plug completely.

• Dirty, loose or broken power plug can cause electric shock or fire.

Be sure to check the refrigerant to be used. Please read the label on the product.

• Incorrect refrigerant used can prevent the normal operation of the unit.

Don't use a power cord, a plug  or a loose socket which is damaged.

• Otherwise it  may cause a fire or electrical shock.

Do not touch , operate, or repair  the product with wet hands. Hold the plug by hand when taking out 

• There is risk of electric shock  or fire.

Do not place a heater or other heating appliances near the power cable.

• There is risk of fire and electric shock.

Do not allow water to run into electric parts. Install the unit away from water sources.

• There is risk of fire, failure of the product, or electric shock.

Do not store or use or even allow flammable gas or combustibles near the product. 

• There is risk of fire.

Do not use the product in a tightly closed space for a long time. Perform ventilation regularly.

• Oxygen deficiency could occur and hence harm your health.

Do not open the front  grille of the product during operation. (Do not touch the electrostatic filter, if the unit is so equipped.) 

• There is risk of physical injury, electric shock, or product failure.

If strange sound, smell or smoke comes from product.Immediately turn the breaker off or disconnect the power supply cable.

• There is risk of electric shock or fire.

Ventilate the product room  from time to time when operating it together with a stove, or heating element etc.

• Oxygen deficiency can occur and hence harm your health.

Turn the main power off and unplug the unit when cleaning or repairing the product. 

• There is risk of electric shock.

When the product is not to  be used for a long time, disconnect the power supply plug or turn off the breaker.

• There is risk of product damage or failure, or unintended operation.

Take care to ensure that nobody especially kids could step on or fall onto the outdoor unit. 

• This could result in personal injury and product damage. 

Take care to ensure that power cable could not be pulled out or damaged during operation.

• There is risk of fire or electric shock.

Do not place ANYTHING  on the power cable.

• There is risk of fire or electric shock.

Do not plug or unplug the power supply plug to turn the unit ON/OFF .

• There is risk of fire or electric shock.

When flammable gas leaks, turn off the gas and open a window for ventilation befor turning on the product.

• Do not use the telephone or turn switches on or off. There is risk of explosion or fire.

For inner cleaning, contact an Authorized Service Center or a dealer. 

• Do not use harsh detergent that causes corrosion or damage on the unit. 

Harsh detergent may also cause failure of product, fire, or electronic shock. 

Two or more people must lift and transport the product. 

• Avoid personal injury. 

Do not install the product where it will be exposed to sea wind (salt spray) directly.

• It may cause corrosion on the product. 

Install the drain hose to ensure that the condensed  water is drained away properly. 

• A bad connection may cause water leakage.

Keep level even when installing the product.

• To avoid vibration or noise.

Do not install the product where the noise or hot air from the outdoor unit could damage or  disturb the neighborhoods.

• It may cause a problem for your neighbors and hence dispute.

Содержание R24AWN-UD11
























Отзывы: