14
EN
5
Wi-Fi (Optional)
Enables connection of the air conditioner to
the home Wi-Fi.
•
Wi-Fi Pairing : Mode + Fan Speed
•
Wi-Fi Off : Power + Fan Speed
6
Clean Filter
The Clean Filter LED lights up to notify you
that the filter needs to be cleaned. After
cleaning the filter, press
Temp
and
together on the control panel to turn off the
Clean Filter light.
NOTE
•
The filter reset must be done using the
control panel, not the remote control.
•
This feature is a reminder to clean the
air filter for more efficient operation. The
LED light turns on after 250 hours of
operation.
7
Fan Speed
Press to set the Fan Speed to Low (F1),
Medium (F2) or High (F3). Also set the
Diagnosis if held for 5 seconds (For
remote type 2).
8
Temperature Control
The thermostat monitors room
temperature to maintain the desired
temperature. The thermostat can be set
between 16 °C–30 °C (60 °F–86 °F).
Press or arrows to increase or
decrease temperature setting.
9
4-in-1
Press
4-in-1
button repeatedly to select
each step.
NOTE
•
1 step : The power Input is decreased
by 20% compared to rated power input.
−
is displayed on the display screen.
•
2 step : The power Input is decreased
by 40% compared to rated power input.
−
is displayed on the display screen.
•
3 step : The power Input is decreased
by 60% compared to rated power input.
−
is displayed on the display screen.
•
This function is available with Cooling
Mode.
•
Capacity may decrease when 4 modes
is selected.
•
Desired temperature is displayed about
5 seconds if you press FAN SPEED,
or button.
10
Clear
Cancel Sleep and Timer settings. Also set
the Diagnosis if held for 5 seconds (For
remote type 1).
NOTE
•
Auto Restart
: If the air conditioner turns
off due to a power outage, it will restart
automatically once the power is restored, with
the same settings as were set before the unit
turned off.
•
The remote control will not function properly if
the AC infrared sensor is exposed to direct light
or if there are obstacles between the remote
controller and the air conditioner.
•
Default temperature will be minimum 24 °C
(in cooling cycle), when operated with remote
control except power failure/power switched off.
