54
206-4342
(Continued from previous page)
3. If applicable (see also “Before You Begin” above), make sure to set the appropriate TV Zone #
in the Target TV at this time.
Note: In order for the proper TV Zone profile data to be applied, the appropriate
TV Zone # must be set in the Target TV BEFORE importing is initiated.
4
. Insert the USB memory device with the Clone/Configuration (.tlx) file into the USB port on the
Target TV.
5. Press
MENU
on the Installer Remote to display the TV setup menus (TV is in Pass-through
Mode) or the Function Menu (TV is already in FTG Mode).
6. Use the arrow navigation keys to select/highlight either the
General
menu icon from the TV
setup menus or the
Safety
menu icon from the Function Menu. Then, press the number “
7
” key
a total of seven times to access the TV Manager.
Note:
Ez Download is always selected by default when you initially access the TV Manager.
Also note that Diagnostics is for service use only.
7. Use the Up/Down arrow keys to select
Import Clone File
, and then press
OK
.
TV MANAGER
USB
Diagnostics
Ez Download
Download Boot Logo
Update TV Software
Update PTC Software
Import Clone File
Back
OK
8.
In the Import Clone File window, use the Up/Down arrow keys to select the “.tlx” file you want to
import (see example on following page).
Note:
Filenames of exported Clone files are comprised of the TV model and a numeric element,
for example, xxLT572M-UA00001.TLX.
9. If the Clone/Configuration (.tlx) file includes an FTG Channel Map, select the desired Channel
Tuning / Channel Banner Display option at the right side of the Import Clone File window:
• Press the green button on the Installer Remote to select
Logical
tuning.
• Press the yellow button on the Installer Remote to select
Physical
tuning.
Cloning Procedures (Cont.)
(Continued on next page)