LG Pro:Centric 24LT572M Скачать руководство пользователя страница 20

Страница: 20 / 101

206-4342

EZ-Manager Wizard (Cont.)

(Continued from previous page)

• Ensure the USB device to be used has been formatted with FAT format.
•

When creating files to be downloaded, avoid using special characters (?, &, @, etc.) in filenames.

• Refer to “Ez Download Utility” on pages 31 to 34 for further information on the Ez Download

utility.

• Refer to “Custom Master TV Setup” on pages 47 to 49 for information on creating a Clone (.tlx)

file, and/or

refer to “Creating an FTG Configuration File” on pages

56 to 58 for information on

creating an FTG Configuration (.tlx) file for FTG Mode via CPU configuration.

• See Reference section, “Downloading a Boot Logo Image using a USB Memory Device,” for

boot logo image guidelines.

• See Reference section, “Updating TV/PTC Software using a USB Memory Device,” for further

information on software updates.

USB Configuration via EZ-Manager Wizard

With either the TV Configuration Options or the Zone, Label, and Room Number screen on display,

proceed as follows to configure the TV using the USB memory device.

1. Insert the USB memory device with the appropriate file(s) into the TV’s USB port.

2. Use the arrow keys on the Installer Remote to select

USB Configuration

, and then press

You will be redirected to the TV Manager / USB download options.

Note:

You can press on the Installer Remote at any time to return to the EZ-Manager Wizard.

Note:

Ez Download is always selected by default when you initially access the TV Manager.

Also note that Diagnostics is for service use only.

TV MANAGER

USB

Diagnostics

Ez Download

Download Boot Logo

Update TV Software

Update PTC Software

Import Clone File

Back

3. Select the appropriate option from the TV Manager, and initiate the desired download(s).

(Continued on next page)

Содержание Pro:Centric 24LT572M






































































































Результаты поиска

Содержание Pro:Centric 24LT572M

Отзывы:

LG Pro:Centric 24LT572M, Руководство по установке, Страница: 20 / 101

Результаты поиска

Содержание Pro:Centric 24LT572M

Отзывы: