background image

Safety Precaution

Ownerʼs & Installation Manual 

3

ENGLISH

Be sure to request to the
service center or installation
specialty store when
installing products.

• It will cause fire or electric shock

or explosion or injury.

Request to the service center
or installation specialty store
when reinstalling the
installed product.

• It will cause fire or electric shock

or explosion or injury.

Do not disassemble, fix, and
modify products randomly.

• It will cause fire or electric shock.

Do not place flammable
stuffs close to the product.

• It will cause fire.

Do not allow water to run
into the product.

• It will cause electric shock or

breakdown.

Do not give the shock to the
product.

• It will cause breakdown when

giving the shock to the product.

n

Installation

Safety Precaution

• The installation requires expert skills, and it should be installed by the service center or other shops specialized

in the installation and recognized by our company.

• For all the problems arising after installation by someone who has no relevant qualifications, our company will

not provide free service.

• The following safety cautions are provided to prevent unexpected dangers or losses.

: If the user does not follow the mandatory items, it may result in serious injury or death.

: If the user does not follow the mandatory items, it may cause personal injury or property

damage.

: Warning and Caution are to call the userʼs attention to the possible danger. Read and follow

them carefully in order to prevent a safety accident.

: Warning and Caution are indicated in this guide and the product itself to help protect the users

from danger.

WARNING

CAUTION

WARNING

n

In-use

Request to the service center or installation
specialty store when the product  becomes wet.

• It will cause fire or electric shock.

Do not give the shock using sharp and
pointed objects.

• It will cause breakdown by damaging parts.

n

In-use

CAUTION

Do not clean using the
powerful detergent like
solvent but use soft cloths. 

• It will cause fire or product

deformation.

Do not press the screen
using powerful pressure or
select two buttons. 

• It will cause product breakdown or

malfunction.

Do not touch or pull the lead
wire with wet hands.

• It will cause product breakdown or

electric shock.

Содержание PQRCVCL0Q





























Отзывы: