background image

Safety Precautions

4

Simple Wired Remote Controller

Do not modify or lengthen the
power cable at your discretion.
It may cause fire or an electric
shock.

Do not place a heating device
near the product. It may cause
fire.

Do not drop water on to the
product. It may cause an electric
shock or product breakdown.

Do not place something heavy on
the power cable. It may cause fire
or an electric shock.

Do not place a heavy thing on the
product. It may cause product
breakdown.

If the product was submerged
under water, ask the service
center for instruction. It may
cause fire or an electric shock
unless you do that.

n

In-use

n

In-use

Make sure children or senor
citizens use the product under
proper observation in order to
prevent safety accident.

Do not subject the product to
shock. It will cause product
breakdown.

Do not pick the product with a
sharp tool. It may cause
product breakdown with the
damage to its parts.

Do not clean the product with strong cleanser such
as solvent. Use soft clothes in order to prevent fire
or product deformation.

Do not touch the product with a wet hand. Do not
pull the lead cable. It may cause product breakdown
or an electric shock.

CAUTION

Содержание PQRCFCS0C





















Отзывы: