12
•
Check the enclosed accessories before installation. We are not responsible for any lost or damaged accessories after the inner packaging is
opened.
•
When an infant or small child swallows the enclosed accessories, various safety accidents such as choking may occur. Keep the enclosed
accessories out of the reach of infants and children.
•
When tightening screws, tighten until fully snug.
Avoid using excessive force when tightening the screws. Doing so may damage the wall and product or reduce the rigidity or performance of the
product.
•
Avoid installing a TV that exceeds the specified tensile load, and do not allow any external force to be applied to the product.
•
Avoid accidents by using work tools with care during installation.
Tools for Installation
•
“+” shaped screwdriver (manual or electric) / level / drill / Ø 8 mm drill bit for concrete or Ø 4 mm drill bit for steel
Securing TV to the Wall
(Except for OLW480B)
•
Please use the TV close to the wall after installation.
How to fix anchors and screws
(Except for OLW480B)
Please make sure that:
•
Check that the material and thickness of the wall and finishing material comply with the installation manual. Before beginning the mounting
process, you must be sure the wall is able to support the weight of the TV.
•
Should use the enclosed anchors and screws on crack-free concrete walls.
•
Never install the product on a plasterboard or wall made of paper or medium-density fiberboard (MDF). When it is necessary to install the
product on such wall, anchor screws must be fastened to retaining walls (concrete) or wood Stud inside the finishing material.
•
The wall mount should be attached to a stud. This usually will not be a problem, but depending on individual circumstances, there may be cases
when the ability to mount into a stud is not possible. In this case, there are a variety of drywall anchors, such as toggle bolts, which may provide
a solution. If using drywall anchors, please be sure the anchors and the wall have the ability to support the weight of your TV. Please note that
the supplied anchors may not be the correct ones for your individual situation, so you should check with a local professional.
•
Other unspecified walls must be capable of supporting pullout loads of over 70 kgf (686 N) and shear loads of over 100 kgf (980 N) per fastener.
•
Use an Ø 8 mm drill bit for concrete and a hammer (impact) drill or Ø 4 mm drill bit for wood stud to drill holes.
