LG OLED55B7T.ATR, Безопасность и справочная информация

Страница: 5 / 47

ENGLISH
5
•
When moving the product, make sure you turn the power off first.
Then, unplug the power cables, antenna cables and all connecting
cables.
The TV set or power cord may be damaged, which may create a fire
hazard or cause electric shock.
•
When moving or unpacking the product, work in pairs because the
product is heavy. Otherwise, this may result in injury.
•
Refer all servicing to qualified service personnel. Servicing is required
when the apparatus has been damaged in any way, such as power
supply cord or plug is damaged, liquid has been spilled or objects
have fallen into the apparatus, the apparatus has been exposed to
rain or moisture, does not operate normally, or has been dropped.
•
Do not use high voltage electrical goods near the TV (e.g. electric
mosquito-swatter). This may result in product malfunction.
•
When cleaning the product and its components, unplug the power
first and wipe it with a soft cloth. Applying excessive force may
cause scratches or discolouration. Do not spray with water or wipe
with a wet cloth. Never use glass cleaner, aerial fresher, insecticide,
lubricants, wax (car, industrial), abrasive, thinner, benzene, alcohol
etc., which can damage the products and its panel. Otherwise, this
may result in fire, electric shock or product damage (Deformation,
corrosion or breakage).
• If the back of the glass on the bottom side of the screen has been
contaminated with dust or other materials, you can clean it using a
cotton flannel or a cloth. (Only OLED65E7*)
Preparing
• If the TV is turned on for the first time after it was shipped from the
factory, initialization of the TV may take a few minutes.
•
Image shown may differ from your TV.
•
Your TV’s OSD (On Screen Display) may differ slightly from that shown
in this manual.
•
The available menus and options may differ from the input source or
product model that you are using.
• New features may be added to this TV in the future.
•
The items supplied with your product may vary depending on the
model.
•
Product specifications or contents of this manual may be changed
without prior notice due to upgrade of product functions.
•
For an optimal connection, HDMI cables and USB devices should have
bezels less than 10 mm thick and 18 mm width. Use an extension
cable that supports USB 2.0 if the USB cable or USB memory stick
does not fit into your TV’s USB port.
A
B
A
B * A
<
=
10 mm
* B
<
=
18 mm
• Use a certified cable with the HDMI logo attached.
•
If you do not use a certified HDMI cable, the screen may not display or
a connection error may occur. (Recommended HDMI Cable Types)
-
High-Speed HDMI ® / TM Cable (3 m or less)
- High-Speed HDMI ® / TM Cable with Ethernet (3 m or less)
•
Do not use any unapproved items to ensure the safety
and product life span.
•
Any damage or injuries caused by using unapproved
items are not covered by the manufacturer’s warranty.
•
Some models have a thin film attached on to the
screen and this must not be removed.
•
When attaching the stand to the TV set, place the
screen facing down on a cushioned table or flat surface
to protect the screen from scratches.
•
Make sure that the screws are fastened completely. (If
they are not fastened securely enough, the TV may tilt
forward after being installed.) Do not use too much
force and over tighten the screws; otherwise screw
may be damaged and not tighten correctly.
•
Make sure to wring any excess water or cleaner from
the cloth.
•
Do not spray water or cleaner directly onto the TV
screen.
•
Make sure to spray just enough of water or cleaner
onto a dry cloth to wipe the screen.