38
ENG
English
Using PCoIP solution
y
Ping settings
y
Destination
The IP address or FQDN to perform the ping
test.
y
Interval
The interval between the ping packets.
y
Packet Size
The size of the ping packet.
y
Packets
y
Sent
The number of ping packets sent.
y
Received
The number of ping packets received.
Figure 2-19. PCoIP Processor Configuration
Figure 2-20. Ping Configuration
PCoIP Processor Tab
The PCoIP Processor tab allows the administrator
to view the portal PCoIP processor's uptime since
its last booting.
Ping Tab
The Ping tab allows the administrator to perform a
ping test to the device and check if it can reach the
overall IP network. This is useful to check whether
the device can reach the host.
y
The PCoIP Processor Uptime can also be
viewed using the Webpage Administration
Interface.
y
The Ping tab has no corresponding menu in
to the Webpage Administration Interface of
Section 1.
noTE
y
bytes statistics
y
Bytes Sent
The Bytes Sent field shows the total number
of bytes sent in the last active session.
y
Bytes Received
The Bytes Received field shows the total
number of bytes received in the last active
session.
y
Round Trip latency
The Round Trip Latency field shows the total
round-trip PCoIP system (e.g. from the portal to
the host, then back to the portal) and the network
latency in milliseconds (+/- 1 ms).
noTE
