LG Multi V S Скачать руководство пользователя страница 6 | Manualshive

Страница: 6 / 77

background image

6

IMPORTANT SAFETY INSTRUCTIONS

ENGLISH

• Be very careful about product transportation.

- Only one person should not carry the product if it weighs more than 20 kg.
- Some products use PP bands for packaging. Do not use any PP bands for a means of transportation. It is

dangerous.

- Do not touch the heat exchanger fins. Doing so may cut your fingers.
- When transporting the outdoor unit, suspending it at the specified positions on the unit base. Also

support the outdoor unit at four points so that it cannot slip sideways.

• Safely dispose of the packing materials.

- Packing materials, such as nails and other metal or wooden parts, may cause stabs or other injuries.
- Tear apart and throw away plastic packaging bags so that children may not play with them. If children play

with a plastic bag which was not torn apart, they face the risk of suffocation.

• Turn on the power at least 6 hours before starting operation.

- Starting operation immediately after turning on the main power switch can result in severe damage to

internal parts. Keep the power switch turned on during the operational season.

• Do not touch any of the refrigerant piping during and after operation.

- It can cause a burn or frostbite.

• Do not operate the air conditioner with the panels or guards removed.

- Rotating, hot, or high-voltage parts can cause injuries.

• Do not directly turn off the main power switch after stopping operation.

- Wait at least 5 minutes before turning off the main power switch. Otherwise it may result in water

leakage or other problems.

• Auto-addressing should be done in condition of connecting the power of all indoor and outdoour units. Auto-

addressing should also be done in case of changing the indoor unit PCB.

• Use a firm stool or ladder when cleaning or maintaining the air conditioner.

- Be careful and avoid personal injury.

• Do not insert hands or other objects through the air inlet or outlet while the air conditioner is powered

on.
- There are sharp and moving parts that could cause personal injury.

• Means for disconnection must be incorporated in the fixed wiring in accordance with the wiring rules.

«
...
4
5
6
7
8
...
»

Содержание Multi V S














































































Отзывы:

Нет отзывов

Похожие инструкции для Multi V S

Бренд: Waterwise Страницы: 12

Бренд: Panasonic Страницы: 14

Бренд: Panasonic Страницы: 12

Бренд: Danby Страницы: 28

Бренд: Danby Страницы: 13

Premiere DPAC9009

Бренд: Danby Страницы: 24

Бренд: Samsung Страницы: 14

Бренд: Samsung Страницы: 108

Бренд: Samsung Страницы: 16

Бренд: Samsung Страницы: 29

Бренд: Samsung Страницы: 16

Бренд: Samsung Страницы: 16

Бренд: Samsung Страницы: 14

VERT-I-PAK B-SERIES

Бренд: Friedrich Страницы: 20

Бренд: York Страницы: 30

Бренд: AERMEC Страницы: 48

Бренд: Ozontech Страницы: 11

Бренд: Pump House Страницы: 17

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды