LG multi V ARUN080BSS0 Скачать руководство пользователя страница 4 | Manualshive

Страница: 4 / 75

background image

• When installing and moving the air conditioner to another site, do not charge it with a

different refrigerant from the refrigerant specified on the unit.
- If a different refrigerant or air is mixed with the original refrigerant, the refrigerant cycle may mal-

function and the unit may be damaged.

• Do not reconstruct to change the settings of the protection devices.

- If the pressure switch, thermal switch, or other protection device is shorted and operated forcibly,

or parts other than those specified by LGE are used, fire or explosion may result.

• Ventilate before operating air conditioner when gas leaked out.

- It may cause explosion, fire, and burn.

• Securely install the cover of control box and the panel.

- If the cover and panel are not installed securely, dust or water may enter the outdoor unit and fire

or electric shock may result.

• If the air conditioner is installed in a small room, measures must be taken to prevent the refrigerant

concentration from exceeding the safety limit when the refrigerant leaks.
- Consult the dealer regarding the appropriate measures to prevent the safety limit from being ex-

ceeded. Should the refrigerant leak and cause the safety limit to be exceeded, harzards due to lack
of oxygen in the room could result.

Operation

• Do not damage or use an unspecified power cable.

- There is risk of fire, electric shock, explosion, or injury.

• Use a dedicated power cable for this appliance.

- There is risk of fire or electrical shock.

• Be cautious that water could not enter the product.

- There is risk of fire, electric shock, or product damage.

• Do not touch the power switch with wet hands.

- There is risk of fire, electric shock, explosion, or injury.

• When the product is soaked (flooded or submerged), contact an Authorized Service Center.

- There is risk of fire or electric shock.

• Be cautious not to touch the sharp edges when installing.

- It may cause injury.

• Take care to ensure that nobody could step on or fall onto the outdoor unit.

- This could result in personal injury and product damage.

• Do not open the inlet grille of the product during operation. (Do not touch the electrostatic filter, if the unit is so

equipped.)
- There is risk of physical injury, electric shock, or product failure.

IMPORTANT SAFETY INSTRUCTIONS

4

ENGLISH

1,MFL67798018,영영 2018. 6. 15. 영영 2:28 Page 4

«
...
2
3
4
5
6
...
»

Содержание multi V ARUN080BSS0












































































Отзывы:

Нет отзывов

Похожие инструкции для multi V ARUN080BSS0

Бренд: GD Midea Refrigeration Equipment Страницы: 30

Бренд: Panasonic Страницы: 56

Бренд: Panasonic Страницы: 60

Бренд: Panasonic Страницы: 297

Бренд: Quasar Страницы: 24

Бренд: Quasar Страницы: 24

Бренд: Quasar Страницы: 20

MissionCritical MC-2x2

Бренд: AboveAir Technologies Страницы: 24

PROFESSIONAL XL INN-560

Бренд: INNOLIVING Страницы: 28

Бренд: Saivod Страницы: 88

Бренд: Olmo Страницы: 19

Бренд: Daikin Страницы: 6

Бренд: AlpicAir Страницы: 35

Бренд: Daikin Страницы: 10

Бренд: Fakir Страницы: 56

climaVAIR V 7-050 NW

Бренд: Vaillant Страницы: 24

Бренд: ICP Страницы: 12

Comfort-Aire BD-101

Бренд: Heat Controller Страницы: 35

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды