Optional Operation
Installation Manual
21
ENGLISH
Optional Operation
Installer Setting -Test Run Mode
Function Code
Set
Press button to start.
3
During the test run, pressing the below
button will exit the test run.
- Select operation, temperature
up/down, wind flow control, wind
direction, start/stop button.
4
If pressing button long for 3 seconds,
it enters into remote controller setter
setup mode.
- If pressing once shortly, it enters into
user setup mode. Please press more
than 3 seconds for sure.
- Please cancel the right and left of wind
direction for RAC product.
1
Setup figure '01' blinks at the lower part
of indication window.
2
After installing the product, you must run a Test Run mode.
For details related to this operation, refer to the product manual.
Содержание MT11AH
Страница 29: ......
