4
UNPACKING & INSTALLING
Place your oven on a flat, level surface but make sure there is at least
10 cm
of space on the
top, rear and sides so there is air flow for ventilation. Exhaust outlets are located in the back and
side of your oven. Blocking the outlets can damage your oven. THIS OVEN IS DESIGNED FOR AN
INDIVIDUAUL BUILT IN APPLICATION. IT SHOULD NOT BE PART OF A WALL OVEN ENCLOSURE
Unpack your oven and place it on a flat level surface.
By following the basic steps on these two pages you will be able to quickly check that your oven
is operating correctly. Please pay particular attention to the guidance on where to install your
oven. When unpacking your oven make sure you remove all accessories and packing.
Check to make sure that your oven has not been damaged during delivery.
THIS OVEN SHOULD NOT BE USED FOR COMMERCIAL
CATERING PURPOSES
GLASS TRAY
WITHOUT SEPERATION.
ROTATING RING