32
USING THE PROJECTOR
USING THE PROJECTOR
Connecting the Antenna or Cable
To watch TV using an indoor/outdoor antenna, connect a wall terminal and
the antenna port of the Projector using an RF cable (75 Ω).
You can watch terrestrial or cable (analog, digital) TV. (The RF cable is
sold separately.)

•
Make sure not to bend the copper wire of
the RF cable (75 Ω). Turn the input jack to
the right to fasten it.
•
Ensure you use a standard coaxial cable
(75 Ω, sold separately) when connecting to
the projector input.
•
For better image quality in locations where
signal strength is low, purchase and install a
signal amplifier (booster).
•
A signal splitter is required if you want to use two or more
projectors through one antenna.
•
If you have any problems when installing the antenna, please
consult a suitable retailer or the store where you purchased the
antenna.
NOTE
Copper wire
