
L. C-MOTOR AND SHEATH HEATER
REMOVAL
1) Remove the air guide and the air duct.
2) Disconnect the leadwire from the circulation motor
and the sheath heater.
3) Remove four hex nuts securing the chamber guide
assembly to the oven cavity.
4) Remove a hex nut securing the circulation fan to
the shaft of the circulation motor.
5) Remove four screws securing the sheath heater
and the chamber.
6) Remove two hex nuts securing the circulation
motor to the chamber.
M. INTERLOCK SYSTEM
1) INTERLOCK MECHANISM
The door lock mechanis m is a device which has
been s pecially des igned to eliminate completely
microwave activity when the door is opened during
cooking and thus to prevent the danger res ulting
from the microwave leakage.
2) MOUNTING OF THE PRIMARY/MONITOR/
SECONDARY SWITCHES TO THE LATCH
BOARD
3) INSTALLATION AND ADJUSTMENT OF THE
LATCH BOARD TO THE OVEN ASSEMBLY
• Mount the latch board to the oven assembly.
• Adjust the latch board in the arrow direction so that
oven door will not have any play in it when the door
is closed.
• Tighten the mounting screw.
5-6
Holder Locker
Primary
Switch
Lever
Monitor Switch
Secondry
Switch
Содержание MC-3182NBR
Страница 9: ...SCHEMATIC DIAGRAM 4 3 ...
Страница 31: ... 6 2 13551A 13581A 13650A 14810L 14810R 14270A WNZ027 13213A 14026A 13552A WSZ085 WTP005 WTP037 DOOR PARTS EV ...
Страница 37: ......